Artillery-Sidewinder-ASX1
| Foto | ||
|---|---|---|
| ||
| Basisdaten | ||
| Hersteller | Artillery | |
| Typ | Sidewinder X1 | |
| Zustand | funktionstüchtig | |
| Klassifizierung |  
| |
3D Drucker Artillery Sidewinder X1
Der Drucker wurde uns im Mai 2020 gespendet, und hat für die Corona Faceschield Produktion schon sehr gute Dienste geleistet!
Einstellungen für Cura 4.6
| Printer Settings | |
|---|---|
| X (Width) | 300 mm |
| Y (Depth) | 300 mm |
| Z (Height) | 400 mm |
| Build Plate shape | Rectangular |
| Heated bed | X |
| G-code flavour | Marlin |
| Printhead Settings | |
|---|---|
| Xmin | -20 mm |
| Ymin | -10 mm |
| X max | 10 mm |
| y max | 10 mm |
| Gantry Height | 40 mm |
| Number of Extruders | 1 |
Start G-code
<pre>
G28 ; home all axes
M117 Purge extruder
G92 E0 ; reset extruder
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
G1 X0 Y50 F5000.0 ; wiggle a bit.
G1 X0 Y20 Z0.3 F500.0 E6 ; wiggle a bit.
G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position
G1 X2 Y150.0 Z0.3 F1500.0 E15 ; draw 1st line
G1 X2.2 Y150.0 Z0.4 F5000.0 ; move to side a little
G1 X2.2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line
G92 E0 ; reset extruder
G1 F1500 E-1 ; retract a bit; before it moves in, it does G92E0 and (if enabled) a retraction).
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
</pre>
End G-Code
<pre>
M104 S0; turn off extruder
M140 S0 ; turn off bed
G1 F1500 E-2 ; retract a bit
G92 Z0 ; reset Z axis coordinate system to 0 without moving. Next move only is relative.
G1 Z20.0 F500 ; move z up 2cm to allow ooze under the nozze & space for cleaning
G1 X0 F1000 ; prepare for part removal
G1 X3 Y250.0 F3000 ; is the disable moter kicking in too early?
M84 S5; disable motors, limit idle hold to 5s
M106 S0 ; turn off fan
</pre>
